Unlike standard vibratory pile drivers, a variable moment pile driver driver can adjust the amplitude of its vibrations in real-time, allowing the operator to fine-tune the driving force based on soil conditions and project requirements.
The variable moment design minimizes vibrations generated during start-up and shut-down phases, significantly reducing the impact on nearby structures and utilities.
Due to its precise control over vibration levels, variable moment pile drivers are frequently used in urban environments, close to historical buildings, or near sensitive infrastructure where excessive ground vibrations need to be.
Features and advantages
Precision
- Real-time vibration control for accuracy & efficiency.
Eco-Friendly
- Less noise & vibration than traditional methods.
Fast
- Optimized driving for various soil conditions.
Safe
- Reduced risk of pile damage.
Versatile
- Suitable for diverse projects & environments.
Technical specs
Changez d'unité de mesure
| Model | MG-90 Variable Moment |
|---|---|
| Excavator Class (Tons) | 30-45 |
| Frequency (RPM) | 2800 |
| Centrifugal Force (kN/Tons) | 883 / 90 |
| Eccentric moment (kgm/in-lbs) | 9,33 / 810 |
| Oil Flow (L/min / GPM) | 249 / 66 |
| Maximum Pressure Setting (bar/PSI) | 310 / 4500 |
| Amplitude - max. (mm/inch) | 10,5 / 0,41 |
| Net Weight (kg/Lbs) | 3418 / 7520 |
| Number of Eccentrics | 4 |
| Height (mm/inches) | 2337 / 92 |
| Rotation / Tilt Angle (Degrees) | 360 / 40 |
| Operating Modes | Automatic (adjustable dwell and stroke parameters) or Manual |
| Model | Gilbert Hydraulic Drop Hammer |
|---|---|
| Excavator Class (Tons) | 30-45 |
| Maximum Energy (Ft.lbs) | 27200 |
| Maximum Vertical travel (ft.) | 8 |
| Mass weight (lbs) | 4000 |
| Max Blows Per Minute (bpm) | 22 |
| Net weight (lbs) | 9964 |
| Height (in.) | 211 |
| Oil Flow (GPM) | 20 |
| Oil Pressure (bar / PSI) | 4500 |
| Angle Sensor | Included |
| Mass Height Sensor | Included |
| Operating Modes | Automatic (adjustable dwell and stroke parameters) or Manual |